This release note and the software that accompanies it are copyright (c) 2004, Intel Corporation, and may only be installed and used in accordance with the license that accompanies the software.

This version of firmware is designed for controllers using software stack 1 (SRCZCR, SRCU42L, SRCU32, SRCS14), it is not compatible with the SRCU42X, SRCS16, or later controllers.
You can verify compatability on the RAID controller's driver page at http://support.intel.com.


This download is packaged as a zip file and can be unzipped using a variety of compatible zip programs.


Storcon version 2.16.6

This download supports the following Intel(R) SCSI RAID controllers:
SRCU32
SRCU42L
SRCS14L
SRCZCR

For additional information please check the support web page for your controller at //Support.Intel.Com.

Attention!
===========
This program will copy the RAID Storage Console Utility for DOS to a user specified location.  This program requires MSDOS DOS 6.22 or ROMDOS 6.22 for correct operation.
This program is the same managment utility that is integrated in the RAID controller firmware and can be used to configure the RAID controller and Host Drives.


Contents
=========

File		Version		Size	Date         	Description		
-----		--------     	-----	-----        	------------
STORCON.EXE	2.16.6	     	452KB	02/12/04     	RAID Storage Console for DOS 
README.TXT	n/a	       	2KB    	02/2004	    	This file


Using This Tool
================
1. Extract this files to a bootable floppy diskette (you must must make the disk bootable using the dos 'format /s' command or 'sys' command).
2. Boot to the floppy diskette.
3. From the command prompt type: storcon.exe and press enter.
4. When the tool loads, use it to perform RAID configuration options.  For a complete guide to this tool refer to the RAID Software Guide for your controller.

Refer to the user documentation for more information on how to use this tool.


*Other names and brands may be claimed as the property of others.	
